Product Details
DENSO ADC SE1-BUB
Data entry to smart devices is now easier, quicker and more accurate!
Description
Ideal for reading and writing to individual tags. |
 |
With a reading distance of about 3 cm (1), which is ideal for one-to-one RF tag processing, there is no need to worry about reading the surrounding RF tags, and it is possible to smoothly process each individual RF tag. It provides a function that is not found in high-power RF equipment for wide-range, batch reading. |
Easy to carry |
 |
It’s small enough to fit in your pocket, so it won’t get in the way even if you have it all day. In addition, it is a specific power-saving model, lets you can carry it anywhere. It is recommended for sites where all staff want to have a scanner with them at all times. |
Connects to all detected Bluetooth devices |
 |
You can easily connect to a Bluetooth-equipped® device by simply scanning the code for setting. When serving customers in the store, the range of operations expands, such as being able to make inventory inquiries on the spot. |
Easy to switch from barcode operation |
 |
SGTIN-96 ⇒ equipped with JAN code conversion function (2). You can continue to use the app that was operated by JAN code. In addition, since the barcode and RF tag have the same reading port, it is possible to switch to operation with RF tags with the same operating feel. |
|
|
||
Practical use scene |
 |
Simplifies POS use at stores |
 |
For route salespersons | |
 |
Helps prevent medical errors in hospitals | |
Specifications
| Model | SE1-BUB-C | |
|---|---|---|
| RFID Dept. | Communicative RF Tags | ISO/IEC18000-63 TypeC (EPCglobal Class 1 Gen2) compliant tag |
| Communication Frequency | 916.8MHz、918.0MHz、919.2MHz、920.4～923.4MHz | |
| Channel Width/Number of Channels | 200kHz/19ch | |
| Transmit Output | Specified low-power radio stations: 10 mW or less | |
| Modulation method | PR-ASK | |
| Transmission speed | 40kbps | |
| Reading distance | 3cm(1) | |
| Scanner section | method | Advanced Scan Plus (CCD) |
| Reading Codes | EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN (with add-ons), Interleaved 2 of 5 (ITF), CODABAR (NW-7), CODE32, CODE39, CODE93, CODE128, GS1-128 (EAN-128), MSI, Plessey, GS1 DataBar (RSS) |
|
| Minimum resolution | 0.125mm | |
| PCS Value | 0.3 or higher | |
| Elevation and tilt angles | ±50° | |
| Read Confirmation | Blue, red, green 3-color LED, buzzer | |
| Communication Interfaces | method | Bluetooth Ver.2.1 + EDR Compliant Class 2 |
| profile | SPP、HID | |
| power | Power supply | 2 eneloop× |
| Charging method | Main unit charging, eneloop single charge | |
| Operating time | 12 hours (2) | |
| Environmental Performance | Degree of protection | IPX2 |
| Fall Strength (3) | 6 times on a 1.2m concrete floor | |
| Operating Humidity Range (4) | -5～50℃ | |
| Weight (not including batteries) | Approx. 70g | |
- 1.The communication distance differs depending on the target tag. Evaluation condition = AD-237r6 manufactured by Avery Dennison. The reading distance is for reference only and will vary depending on actual conditions.
- 2.When the RF tag is read once every 5 seconds.
- 3.This is a test value at room temperature, not a guaranteed value.
- 4.When charging, it is 0~40°C.
External dimensions
For customers using 950MHz products
In addition to industrial, scientific, and medical equipment such as microwave ovens, on-premise radio stations and amateur radio stations for mobile identification that require a license to be used on factory production lines, etc., and specified low-power radio stations that do not require a license (hereinafter referred to as “other radio stations”) are operated in the frequency band used by this device.
Due to the revision of the Radio Law, 950 MHz compatible products will not be available after April 1, 2018, so it is necessary to replace them with 920 MHz compatible products. If you have any questions about the exchange, please contact the DENSO WAVE Customer Desk.
Warranty & Return
Warranty & RMA Information:
- Warranty period varies by Manufacturer and Product Range
- Contact us for Warranty specifics for your product
- Contact our RMA department to requesting an RMA (310) 837-5888
- The serial number of your defective product must be provided before we can process the RMA. Serial number can be found on the product label.
- Upon submittal of an RMA request, an email will be sent to the email address provided with instructions on returning the defective product/s.
- Shipping: The customer will only pay for incoming shipment Manufacturer will pay for return shipment (Standard ground service). Charges may apply for expedited shipping.
- Repair turn around time varies by Manufacturer and Product Range.
Non-DOA Returns Policy – All products
- NO open box returns for non-DOA products. Product box must be clean and undamaged, with no marks of any kind. This includes writing, stamps, or shipping labels, i.e., written RMA numbers. All products must be double boxed.
- Original manufacturer’s packaging, both inside and outside must be used. Returns must be complete with all manuals, cables, warranty cards, static bags, etc., just as the customer received them.
- Customers have 30 days from date of invoice to request a non-DOA return. The RMA number issued is valid for 30 days from issue date.
- There will be a restocking fee on returns resulting from customer error.
- Non-DOA configured product may not be returned.
- Products that show signs of use are not returnable to Peripheral Resources as non-DOA.
- For customers on credit terms, credit will be applied to your account when the product is received by Peripheral Resources.
- Customer is responsible for freight costs when returning product.
DOA Returns Policy
- Refer to manufacturer’s warranties and returns policies.
- If the product is tested and the problem is not duplicated, there may be a No Problem Found fee charged to the customer.
- For customers on credit terms, credit will be applied to your account when the product is received by Peripheral Resources. Replacement product will be sent once DOA item has been received.
- For customers on C.O.D. or credit card status, replacement product will be sent upon receipt of product by Peripheral Resources. If desired, we will send replacement product at your normal C.O.D. or credit card status and you can request a refund or credit to your card when Peripheral Resources receives the returned product.
Downloads
|
User Manual
|
||
|
Product Brochure
|
